Eurotherm Fitted Unconfigured Outputs, Field Configurable

2000 Series Instruments

R1 or RF Relay (2 pin) is Fitted Unconfigured, Field Configurable as the following relay:  RC (Cooling output), RH (Heating output), RU (Valve raise output), RW (Valve lower output), FH (High alarm), FL (Low alarm), DB (Dev. band alarm), DL (Dev. low alarm), DH (Dev. high alarm), AL (High & low alarms 1 & 2).

L1 Logic Output is Fitted Unconfigured, Field Configurable as the following outputs: LC (Cooling output),LH (Heating output); and also Field Configurable in Output 2 as the following Inputs:  AM (Auto manual select), S2 (Setpoint 2 select), AC (Alarm ack/reset), EH (Integral hold), SB (Standby mode), SR (PDS Remote SP select), M5 (CTX mode 5 current I/P).

T1 Triac is Fitted Unconfigured, Field Configurable as the following outputs: TC (Cooling output), TH (Heating output), TU (Valve raise output), TW (Valve lower output).

D3 control (Isolated) Unconfigured, Field Configurable as the following: H6 (0-20mA heating), H7 (4-20mA heating), C6 (0-20mA cooling), C7 (4-20mA cooling), and also Field Configurable as the following Retransmissions: First Digit V (Process value retran), S (Setpoint retran), O (Output retran), Z (Error retran); Second Digit 1 (0-20 mA), 2 (4-20mA), 3 (0-5 volts), 4 (1-5 volts), 5 (0-10 volts).

Comms 2XX Unconfigured, Field Configurable as the following Modbus protocol: 2YM 2-wire RS485), 2AM (RS232), or the following DeviceNet® protocol: 2DN (DeviceNet®), or the following EI-Bisynch protocol: 2YE (2-wire RS485), 2FE (4-wire RS422), 2AE (RS232), or the following PDS inputs: 2M4 (Fitted unconfigured), 2RS (Setpoint input).